Attitude Control and Low Cost Design of UAV Bicopter
This paper present a control system for the attitude and low cost design of a Bicopter. The control system uses a PID controller that receives feedback from an IMU to calculate control inputs that adjust the Bicopters attitude (roll, pitch and yaw angles) which is resistant to disturbances (wind noise) on a test bed. The control system is implemented on a hardware platform consisting of a Bicopter, an IMU sensor, and a microcontroller with low cost design. In mechanical design, the Bicopter is designed to more closely resemble the letter "V" so that the distribution of the centre of mass (CoM) of the Bicopter can be such that the servomotor torque reaction is parallel to the axis of rotation of the Bicopter during the movement of the pitch angle attitude. In electronic design, the Bicopter was developed using the ATmega328P microcontroller.
Code (0)
등록된 구현이 없습니다.
Similar Papers 제목 키워드 기반
Continuous-Time Output Feedback Adaptive Control for Stabilization and Tracking with Experimental Results
This paper presents a continuous-time output feedback adaptive control technique for stabilization and tracking control problems. The adaptive controller is motivated by the classical discrete-time retrospective cost ada…
Trajectory Tracking Control of UAV Bicopter using Linear Quadratic Gaussian
This paper describes the design of a linear quadratic gaussian (LQG) for trajectory tracking control of UAV Bicopter. In this work, disturbance in the form of payload significantly affects the trajectory tracking control…
PositionModeling and Control of a Novel Bi-Quadcopter with Auxiliary Thruster Mechanism
In this paper, a new under-actuated Bi-Quadcopter Unmanned Aerial Vehicle is introduced. The proposed drone configuration can be controlled similar to a Bicopter. The dynamics of the proposed Bi-Quadcopter is developed u…
PositionOptimized Modular Design and Development of a Tilt-Rotor Bicopter Drone
Hybrid systems like tilt-rotor bicopter drones combine the beneficial characteristics of both fixed-wing and rotary-wing technology, enabling long endurance and VTOL capability. However, such drones also require an optim…
Attitude Tracking for Rigid Bodies Using Vector and Biased Gyro Measurements
The rigid-body attitude tracking using vector and biased gyro measurements with unknown inertia matrix is studied in this note. First, a gyro-bias observer with global exponential stability is designed. Then, an attitude…