Delay Estimation for Ranging and Localization Using Multiband Channel State Information
In wireless networks, an essential step for precise range-based localization is the high-resolution estimation of multipath channel delays. The resolution of traditional delay estimation algorithms is inversely proportional to the bandwidth of the training signals used for channel probing. Considering that typical training signals have limited bandwidth, delay estimation using these algorithms often leads to poor localization performance. To mitigate these constraints, we exploit the multiband and carrier frequency switching capabilities of wireless transceivers and propose to acquire channel state information (CSI) in multiple bands spread over a large frequency aperture. The data model of the acquired measurements has a multiple shift-invariance structure, and we use this property to develop a high-resolution delay estimation algorithm. We derive the Cram\'er-Rao Bound (CRB) for the data model and perform numerical simulations of the algorithm using system parameters of the emerging IEEE 802.11be standard. Simulations show that the algorithm is asymptotically efficient and converges to the CRB. To validate modeling assumptions, we test the algorithm using channel measurements acquired in real indoor scenarios. From these results, it is seen that delays (ranges) estimated from multiband CSI with a total bandwidth of 320 MHz show an average RMSE of less than 0.3 ns (10 cm) in 90% of the cases.
Code (0)
등록된 구현이 없습니다.
Similar Papers 제목 키워드 기반
Multiband Delay Estimation for Localization Using a Two-Stage Global Estimation Scheme
The time of arrival (TOA)-based localization techniques, which need to estimate the delay of the line-of-sight (LoS) path, have been widely employed in location-aware networks. To achieve a high-accuracy delay estimation…
Bayesian Inferenceparameter estimationMulti-User Pilot Pattern Optimization for Channel Extrapolation in 5G NR Systems
Pilot pattern optimization in orthogonal frequency division multiplexing (OFDM) systems has been widely investigated due to its positive impact on channel estimation. In this paper, we consider the problem of multi-user …
Single-anchor UWB Localization using Channel Impulse Response Distributions
Ultra-wideband (UWB) devices are widely used in indoor localization scenarios. Single-anchor UWB localization shows advantages because of its simple system setup compared to conventional two-way ranging (TWR) and trilate…
Indoor LocalizationAnalysis of multipath channel delay estimation using subspace fitting
The presence of rich scattering in indoor and urban radio propagation scenarios may cause a high arrival density of multipath components (MPCs). Often the MPCs arrive in clusters at the receiver, where MPCs within one cl…
Fundamental Limits and Optimization of Multiband Sensing
Multiband sensing is a promising technology that utilizes multiple non-contiguous frequency bands to achieve high-resolution target sensing. In this paper, we investigate the fundamental limits and optimization of multib…