Design Methodology for a Medium Voltage Single Stage LLC Resonant Solar PV Inverter
An inverter is generally employed with MV LFT to connect to the grid in a grid-tied PV system. However, in some single-stage topologies, the LFTs are replaced by HFT combined with an unfolder inverter. Generally, these topologies have limited use at high-power MV grids due to high switching losses on the primary side. This study proposes an LLC resonant converter-based single-stage inverter design procedure. Resonant converters make use of ZVS to reduce switching losses. The design includes both the resonant tank as well as output filter components. The design is verified by simulations in MATLAB/Simulink for various loads and input voltages at 13.8kV grid output voltage. THD simulations validate the filter design.
Code (0)
등록된 구현이 없습니다.
Similar Papers 제목 키워드 기반
Single Stage PFC Flyback AC-DC Converter Design
This paper discusses a 100 W single stage Power Factor Correction (PFC) flyback converter operating in boundary mode constant ON time methodology using a synchronous MOS-FET rectifier on the secondary side to achieve hig…
Towards a more comprehensive open-source model for interdisciplinary smart integrated energy systems
The energy transition has recently experienced a further acceleration. In order to make the integration of renewable energies as cost-effective, secure and sustainable as possible and to develop new paradigms for the ene…
Grid Value Analysis of Medium Voltage Back-to-Back Converter on DER Hosting Enhancement
This paper presents an analysis of the value that can be realized by medium-voltage back-to-back (MVB2B) converters in terms of increased utilization rate of distributed energy resource (DER) and the improvement in opera…
Improved DC Bus Voltage Control of Single-Phase Grid-Connected Voltage Source Converters for Minimising Bus Capacitance and Line Current Harmonics
There is a trade-off between transient performance and line current distortion of the DC bus voltage control of single-phase grid-connected voltage source converters. This paper presents an improved DC bus voltage contro…
Sizing and Location Selection of Medium-Voltage Back-to-Back Converter for DER-Dominated Distribution Systems
Medium-voltage back-to-back (MVB2B) converters can connect two distribution systems and quantifiably transfer power between them. This function can enable the MVB2B converter to exchange distributed energy resource (DER)…