Large-Area Conductor-Loaded PDMS Dielectric Composites for High-Sensitivity Wireless and Chipless Electromagnetic Temperature Sensors
Wireless electromagnetic sensing is a passive, non-destructive technique for measuring physical and chemical changes through permittivity or conductivity changes. However, the readout is limited by the sensitivity of the materials, often requiring complex sampling, particularly in the GHz range. We report capacitive dielectric temperature sensors based on polydimethylsiloxne (PDMS) loaded with 10 vol% of inexpensive, commercially available conductive fillers including copper powder (Cu), graphite powder (GP) and milled carbon fibre powder (CF). The sensors are tested in the range of 20{\deg}C to 110{\deg}C, with enhanced sensitivity from 20 to 60{\deg}C, and relative response of up to 85.5% at 200 MHz for CF loaded capacitors. Additionally, we demonstrate that operating frequency influences the relative sensing response by as much as 15.0% in loaded composite capacitors. Finally, we demonstrate the suitability of PDMS-CF capacitors as a sensing element in wirelessly coupled chipless resonant coils tuned to 6.78 MHz with a readout response, in the resonant frequency of the sensor. The wireless readout of the PDMS-CF chipless system exhibited an average sensitivity of 0.38 %{\deg}C-1 which is a 40x improvement over a pristine PDMS-based capacitive sensor and outperforms state of the art frequency-domain radio frequency (RF) temperature sensors including carbon-based composites at higher loadings. Exploiting the high sensitivity, we interrogate the sensor wirelessly using a low-cost and portable open-source NanoVNA demonstrating a relative response in the resonant frequency of the reader coil of 48.5%, with the response in good agreement with the instrumentation-grade vector network analyzers (VNAs), demonstrating that the sensors could be integrated into an inexpensive and portable measurement setup that does not rely on specialty equipment or highly trained operators.
Code (0)
등록된 구현이 없습니다.
Tasks
SensitivitySimilar Papers 제목 키워드 기반
NeISF++: Neural Incident Stokes Field for Polarized Inverse Rendering of Conductors and Dielectrics
Recent inverse rendering methods have greatly improved shape, material, and illumination reconstruction by utilizing polarization cues. However, existing methods only support dielectrics, ignoring conductors that are fou…
Inverse RenderingExpanding the extreme-k dielectric materials space through physics-validated generative reasoning
The most technologically consequential materials are often the rarest: they occupy narrow regions of chemical space, obey competing physical constraints, and appear only sparsely in existing databases. High-kappa dielect…
Conservation of Charge and Conservation of Current
Conservation of current and conservation of charge are nearly the same thing: when enough is known about charge movement, conservation of current can be derived from conservation of charge, in ideal dielectrics, for exam…
Robust interaction control of a dielectric elastomer actuator with variable stiffness
This paper presents an interaction control algorithm for a dielectric elastomer membrane actuator. The proposed method permits efficient exploitation of the controllable stiffness of the material, allowing to use the mem…
DeepRWCap: Neural-Guided Random-Walk Capacitance Solver for IC Design
Monte Carlo random walk methods are widely used in capacitance extraction for their mesh free formulation and inherent parallelism. However, modern semiconductor technologies with densely packed structures present signif…