홈 › Papers

Programming tension in 3D printed networks inspired by spiderwebs

Each element in tensioned structural networks -- such as tensegrity, architectural fabrics, or medical braces/meshes -- requires a specific tension level to achieve and maintain the desired shape, stability, and compliance. These structures are challenging to manufacture, 3D print, or assemble because flattening the network during fabrication introduces multiplicative inaccuracies in the network's final tension gradients. This study overcomes this challenge by offering a fabrication algorithm for direct 3D printing of such networks with programmed tension gradients, an approach analogous to the spinning of spiderwebs. The algorithm: (i) defines the desired network and prescribes its tension gradients using the force density method; (ii) converts the network into an unstretched counterpart by numerically optimizing vertex locations toward target element lengths and converting straight elements into arcs to resolve any remaining error; and (iii) decomposes the network into printable toolpaths; Optional additional steps are: (iv) flattening curved 2D networks or 3D networks to ensure 3D printing compatibility; and (v) automatically resolving any unwanted crossings introduced by the flattening process. The proposed method is experimentally validated using 2D unit cells of viscoelastic filaments, where accurate tension gradients are achieved with an average element strain error of less than 1.0\%. The method remains effective for networks with element minimum length and maximum stress of 5.8 mm and 7.3 MPa, respectively. The method is used to demonstrate the fabrication of three complex cases: a flat spiderweb, a curved mesh, and a tensegrity system. The programmable tension gradient algorithm can be utilized to produce compact, integrated cable networks, enabling novel applications such as moment-exerting structures in medical braces and splints.

Code (0)

등록된 구현이 없습니다.

Similar Papers 제목 키워드 기반