Rotor Thermal Monitoring Scheme for Direct-Torque-Controlled Interior Permanent Magnet Synchronous Machines via High-Frequency Rotating Flux or Torque Injection
Interior permanent magnet synchronous machine drives are widely employed in electric traction systems and various industrial processes. However, prolonged exposure to high temperatures while operating can demagnetize the permanent magnets to the point of irreversible demagnetization. In addition, direct measurements with infrared sensors or contact-type sensors with wireless communication can be expensive and intrusive to the motor drive systems. This paper thus proposes a nonintrusive thermal monitoring scheme for the permanent magnets inside the direct-torque-controlled interior permanent magnet synchronous machines. By applying an external high-frequency rotating flux or torque signal to the hysteresis torque controller in the motor drive, the high-frequency currents can be injected into the stator windings. The permanent magnet temperature can thus be monitored based on the induced high-frequency resistance. The nonintrusive nature of the method is indicated by the elimination of the extra sensors and no hardware change to the existing system. Finally, the effectiveness of the proposed method is validated with experimental results.
Code (0)
등록된 구현이 없습니다.
Similar Papers 제목 키워드 기반
FAM-DQ: A Dual-Quadrotor-Based Fully Actuated Aerial Manipulator for High-Torque Interaction
Aerial physical interaction requires aerial manipulation platforms to generate large interaction forces and torques while maintaining precise end-effector control. However, conventional underactuated aerial manipulators …
Thermal Image-based Fault Diagnosis in Induction Machines via Self-Organized Operational Neural Networks
Condition monitoring of induction machines is crucial to prevent costly interruptions and equipment failure. Mechanical faults such as misalignment and rotor issues are among the most common problems encountered in indus…
BenchmarkingDiagnosticFault DiagnosisAccurate Control under Voltage Drop for Rotor Drones
This letter proposes an anti-disturbance control scheme for rotor drones to counteract voltage drop (VD) disturbance caused by voltage drop of the battery, which is a common case for long-time flight or aggressive maneuv…
Design, Control, and Motion-Planning for a Root-Perching Rotor-Distributed Manipulator
Manipulation performance improvement is crucial for aerial robots. For aerial manipulators, the baselink position and attitude errors directly affect the precision at the end effector. To address this stability problem, …
Motion PlanningA New 8/14 Two-Phase Switched Reluctance Motor with Improved Performance
Despite their simple and robust structure, low cost, and simple cooling system, switched reluctance motors (SRMs) face the challenge of low mean torque. A possible solution is to change the structure of SRMs. This articl…