Control of Powered Ankle-Foot Prostheses on Compliant Terrain: A Quantitative Approach to Stability Enhancement
Walking on compliant terrain presents a substantial challenge for individuals with lower-limb amputation, further elevating their already high risk of falling. While powered ankle-foot prostheses have demonstrated adaptability across speeds and rigid terrains, control strategies optimized for soft or compliant surfaces remain underexplored. This work experimentally validates an admittance-based control strategy that dynamically adjusts the quasi-stiffness of powered prostheses to enhance gait stability on compliant ground. Human subject experiments were conducted with three healthy individuals walking on two bilaterally compliant surfaces with ground stiffness values of 63 and 25 kN/m, representative of real-world soft environments. Controller performance was quantified using phase portraits and two walking stability metrics, offering a direct assessment of fall risk. Compared to a standard phase-variable controller developed for rigid terrain, the proposed admittance controller consistently improved gait stability across all compliant conditions. These results demonstrate the potential of adaptive, stability-aware prosthesis control to reduce fall risk in real-world environments and advance the robustness of human-prosthesis interaction in rehabilitation robotics.
Code (0)
등록된 구현이 없습니다.
Similar Papers 제목 키워드 기반
RoboANKLE: Design, Development, and Functional Evaluation of a Robotic Ankle with a Motorized Compliant Unit
This study presents a powered transtibial prosthesis with complete push-off assistance, RoboANKLE. The design aims to fulfill specific requirements, such as a sufficient range of motion (RoM) while providing the necessar…
A Sensorised Lattice Footplate for a Semi-Active Prosthetic Foot
This paper investigates whether magnetic plantar sensing can be embedded directly inside the load-bearing compliant element of a low-cost semi-active prosthetic foot. We present a prototype integrating a sensorised 3D-pr…
Learning a Shared Model for Motorized Prosthetic Joints to Predict Ankle-Joint Motion
Control strategies for active prostheses or orthoses use sensor inputs to recognize the user's locomotive intention and generate corresponding control commands for producing the desired locomotion. In this paper, we prop…
Extending the Law of Intersegmental Coordination: Implications for Powered Prosthetic Controls
Powered prostheses are capable of providing net positive work to amputees and have advanced in the past two decades. However, reducing amputee metabolic cost of walking remains an open problem. The Law of Intersegmental …
End-to-End Control of a Powered Knee-Ankle Prosthesis Towards Unified, Tuning-Free Assistance
Powered prostheses conventionally rely on impedance controllers that require extensive manual tuning and explicit mode classification. In this work, we present real-time deployment of an end-to-end prosthesis controller …