Load-Based Variable Transmission Mechanism for Robotic Applications
This paper presents a Load-Based Variable Transmission (LBVT) mechanism designed to enhance robotic actuation by dynamically adjusting the transmission ratio in response to external torque demands. Unlike existing variable transmission systems that require additional actuators for active control, the proposed LBVT mechanism leverages a pre-tensioned spring and a four-bar linkage to passively modify the transmission ratio, thereby reducing the complexity of robot joint actuation systems. The effectiveness of the LBVT mechanism is evaluated through simulation-based analyses. The results confirm that the system achieves up to a 40 percent increase in transmission ratio upon reaching a predefined torque threshold, effectively amplifying joint torque when required without additional actuation. Furthermore, the simulations demonstrate a torque amplification effect triggered when the applied force exceeds 18 N, highlighting the system ability to autonomously respond to varying load conditions. This research contributes to the development of lightweight, efficient, and adaptive transmission systems for robotic applications, particularly in legged robots where dynamic torque adaptation is critical.
Code (0)
등록된 구현이 없습니다.
Similar Papers 제목 키워드 기반
Design and Modeling of a Simple-Structured Continuously Variable Transmission Utilizing Shape Memory Alloy Superelasticity for Twisted String Actuator
Twisted String Actuators (TSAs) are widely used in robotics but suffer from a limited range of Transmission Ratio (TR) variation, restricting their efficiency under varying loads.To overcome this, we propose a novel ligh…
DSO-VSA: a Variable Stiffness Actuator with Decoupled Stiffness and Output Characteristics for Rehabilitation Robotics
Stroke-induced motor impairment often results in substantial loss of upper-limb function, creating a strong demand for rehabilitation robots that enable safe and transparent physical human-robot interaction (pHRI). Varia…
WAVE: Worm Gear-based Adaptive Variable Elasticity for Decoupling Actuators from External Forces
Robotic manipulators capable of regulating both compliance and stiffness offer enhanced operational safety and versatility. Here, we introduce Worm Gear-based Adaptive Variable Elasticity (WAVE), a variable stiffness act…
Real-time Point Cloud Data Transmission via L4S for 5G-Edge-Assisted Robotics
This article presents a novel framework for real-time Light Detection and Ranging (LiDAR) data transmission that leverages rate-adaptive technologies and point cloud encoding methods to ensure low-latency, and low-loss d…
MORPH Wheel: A Passive Variable-Radius Wheel Embedding Mechanical Behavior Logic for Input-Responsive Transformation
This paper introduces the Mechacnially prOgrammed Radius-adjustable PHysical (MORPH) wheel, a fully passive variable-radius wheel that embeds mechanical behavior logic for torque-responsive transformation. Unlike convent…