State Estimation Using Single Body-Frame Bearing Measurements
This paper addresses the problem of simultaneous estimation of the position, linear velocity and orientation of a rigid body using single bearing measurements. We introduce a Riccati observer-based estimator that fuses measurements from a 3-axis accelerometer, a 3-axis gyroscope, a single body-frame vector observation (e.g., magnetometer), and a single bearing-to-landmark measurement to obtain the full vehicle's state (position, velocity, orientation). The proposed observer guarantees global exponential convergence under some persistency of excitation (PE) condition on the vehicle's motion. Simulation results are presented to show the effectiveness of the proposed approach.
Code (0)
등록된 구현이 없습니다.
Tasks
PositionState EstimationSimilar Papers 제목 키워드 기반
Pose, Velocity and Landmark Position Estimation Using IMU and Bearing Measurements
This paper investigates the estimation problem of the pose (orientation and position) and linear velocity of a rigid body, as well as the landmark positions, using an inertial measurement unit (IMU) and a monocular camer…
PositionMulti-Robot Bearing-only Pose Estimation via Angle Rigidity
This letter proposes a novel distributed bearing-based pose estimator for time-varying multi-robot systems. The method uses angles computed from body-frame bearings to estimate the robots' positions in $\mathbb{R}^3$ wit…
Pose EstimationAn Opticalmechanics Framework for Dynamic Estimation of Multibody Systems
Conventional dynamics analysis of the human body is often constrained by the need for contact force and torque sensors and controlled laboratory environments. To address this issue, this study proposes an opticalmechanic…
Bearing and Distance Formation Control of Rigid Bodies in SE(3) with Bearing and Distance Constraints
Rigidity of the interaction graph is a fundamental condition for achieving the desired formation which can be defined in terms of distance or bearing constraints between agents. In this paper, for reaching a unique forma…
CREPES-X: Hierarchical Bearing-Distance-Inertial Direct Cooperative Relative Pose Estimation System
Relative localization is critical for cooperation in autonomous multi-robot systems. Existing approaches either rely on shared environmental features or inertial assumptions or suffer from non-line-of-sight degradation a…
Pose Estimation